Practical white light when you need it, color when you want it
JackonLux CP-CL13 rechargeable RGB under cabinet lights combine motion-activated 5000K white light with 13-color remote control for cabinets, closets, shelves, counters, bedrooms, and displays. The two 14.6-inch magnetic light bars install without hardwiring and use detachable 1100mAh battery boxes for convenient charging.
Important mode note: Auto motion-sensor mode operates in white light only. Use On mode and the included remote when you want steady RGB color or dynamic effects.
Choose steady light, motion activation, or power off
Steady white or color
Keep the light on continuously. Use the top button to cycle through white, red, green, and blue, or use the remote for the full set of 13 colors and effects.
Hands-free white light
In a dark area, the cabinet light turns on when it detects motion and turns off automatically after approximately 30 seconds without motion.
Store and save power
Switch the light fully off for storage, transport, charging, or an extended period without use.
The manual does not specify a motion detection distance or angle, so no range claim is made on this page.
Set the color, brightness, effect, and timer from a distance
Memory behavior: After the light is switched off or turned off with the remote, it returns to approximately 60% brightness in white when turned on again.
Install on metal or use the included adhesive plates
Choose the location
Use the built-in magnetic mounting points on a compatible iron or steel surface.
Prepare non-metal surfaces
Clean and dry the surface, place the included iron plates at the light’s magnetic positions, then remove the adhesive backing.
Press, attach, and test
Secure the plates, snap the light into place, and test the selected mode before regular use.
Adhesive performance depends on surface condition and material. Do not place the light where a falling unit could cause injury or damage.
Remove the battery boxes when it is time to charge
The charging indicator is red while charging and green when fully charged. Runtime varies with brightness, color, battery condition, and use. Reinstall each battery box in the correct orientation before operating the light.
Useful anywhere a slim wireless light bar fits
- Kitchen cabinets and counters
- Closets, wardrobes, and pantries
- Bookshelves and display cabinets
- Bedrooms and gaming setups
- Hallways and indoor storage areas
- Decorative and seasonal color accents
This manual describes indoor cabinet-light use and does not state an outdoor or water-resistance rating. Keep the lights dry and clean them with a soft cloth.
JackonLux CP-CL13 details at a glance
In the box: 2 cabinet lights, 2 detachable CP-CL13-B battery boxes, 1 remote control, 4 adhesive iron brackets, and 1 USB charging cord. A wall power adapter is not listed as included.
RGB under cabinet light FAQ
Does motion-sensor mode work with RGB colors?
No. The included manual states that Auto motion-sensor mode operates in white light only. Switch to On mode and use the remote for steady RGB colors or Fade and Jump effects.
How long does the light stay on after motion stops?
In a dark area and with the switch set to Auto, it turns off after approximately 30 seconds without detected motion.
Can I install these lights without drilling?
Yes. Attach the lights directly to a compatible metal surface or use the four included adhesive iron plates on a clean, dry non-metal surface.
How long do the rechargeable cabinet lights run?
At 100% white brightness, approximate runtime is 3–4 hours. In RGB colors, approximate runtime is 5–6 hours. Actual results vary with settings and battery condition.
Will the light remember the previous color after it is turned off?
No. After being switched off or turned off by remote, the manual says it returns to approximately 60% brightness in white when turned on again.
What does the remote control?
The remote provides On, Auto, and Off controls; direct color selection; Fade and Jump effects; brightness or effect-speed adjustment; a 30% output shortcut; and 2-, 4-, and 6-hour timers.
Is the remote battery safe around children?
The remote uses a CR2025 3V coin cell. Coin batteries can cause severe internal injury if swallowed. Keep new and used batteries away from children, secure the battery compartment, and seek immediate medical attention if ingestion is suspected.
Need help choosing a cabinet light?
Tell us where you plan to place the lights and whether you need motion-activated white light or remote-controlled color.
